Gold Member Since 2017
Audited Supplier

Qingdao Running Machine Co., Ltd.

Rubber Machine, Rubber Machinery, Rubber Mixing manufacturer / supplier in China, offering Jaw Type Flat Vulcanizing Press/ Rubber Curing Press, 110liter Rubber Internal Kneader Machine for Rubber and Plastic, Rubber Sheet Batch off Equipment and so on.

(/ )

Supplier Homepage Company Show News Open - type mixing machine maintenance procedures


Open - type mixing machine maintenance procedures [Mar 29,2017]
Open - type mixing machine  maintenance procedures
   1. Operator equipment maintenance
    1.1 Check before driving
1.1.1 Check whether there is no debris between the roller and the distance between the two ends are consistent; 1.1.2 Check whether there are foreign parts between the foreign body; 1.1.3 Check whether the emergency braking device is sensitive and reliable; 4 to check whether the oil cup oil, refueling is smooth, and refueling 2-3 laps; 1.2 run-time maintenance 1.2.1 after the boot should be timely to the oil filling part of the oil, often check the oil pipeline is smooth; 1.2.3 initial feeding, the need to use a small roll distance, until the temperature is normal, can increase the roll from the production, adjust the roller from the distance, and then the normal feeding; 1.2.4 often check the roller, reducer, motor bearing temperature is normal, should not have the phenomenon of convergence; 1.2.5 bearing temperature is too high, are not allowed to immediately stop, should be Immediately discharge, open enough to cool the water, add thin oil cooling, and contact the relevant personnel for processing; 1. 2.6 non-emergency situations shall not use emergency stop Device. 1.3 1.3.1 After stopping work off the power turned off water, electricity, gas and each valve; 1.3.2 good surface stations and sanitation; 1.3.3 seriously do shift work.
     2. Maintenance equipment maintenance
  2.1 daily maintenance content
2.1.1 check the sealing parts for oil spills; 2.1.2 check the various parts of the machine fixed bolts are loose; 2.1.3 check the lubrication system is normal oil supply. 2.2.2 Check the reducer oil level; 2.2.3 Check the retaining plate fixing screw is loose; 2.2.4 Check the protective cover, safety device; 2.2.5 Check the valve , instruments, meters, pipes are normal. 2.3 SUMMARY 2.3.1 comprises a circumferential monthly inspection subject content; 2.3.2 Pitch inspection apparatus; 2.3.3 Check motor. 2.4 annual inspection content 2.4.1 including the monthly inspection content: 2.4.2 check the reducer operation; 2.4.3 check the gear wear; 2.4.4 check the control cabinet and control lines.